Nokia Corded Headset HS 69 User Manual

Nokia Display Headset HS-69  
User Guide  
9250693  
Issue 1 EN  
 
Export Controls  
This device may contain commodities, technology or software subject to export laws and  
regulations from the US and other countries. Diversion contrary to law is prohibited.  
9250693 / Issue 1 EN  
 
Contents  
Answer and end calls............................ 9  
Handle multiple calls ......................... 10  
Reject calls............................................ 10  
Voice dialing......................................... 10  
1.Introduction ......................... 5  
2.Headset parts ....................... 6  
3.Basic and call functions...... 8  
Lock keys .................................................. 8  
Adjust earpiece volume........................ 8  
Received messages................................ 8  
Display time............................................. 9  
Make calls................................................ 9  
Redial......................................................... 9  
4. Radio and music functions 11  
Activate the radio or music player. 11  
Radio functions.................................... 11  
Music player functions...................... 12  
Care and maintenance........... 13  
4
 
I n t r o d u c t i o n  
1. Introduction  
The Nokia Display Headset HS-69 allows you to handle basic phone calls,  
listen to FM radio and music tracks, as well as view the current time and  
notifications of received text messages (SMS) and multimedia messages  
(MMS). Some features of the headset are network-dependent.  
The headset connects to compatible Nokia phones with a Pop-PortTM  
connector. To check the compatibility of your Nokia phone, visit the Nokia  
Read this user guide carefully before using the headset. Also read the user  
guide for your phone, which provides important safety and maintenance  
information. Keep the headset out of reach of small children.  
5
 
H e a d s e t p a r t s  
2. Headset parts  
The headset has the following parts:  
• Earpieces (1)  
• Clip, which goes at the back of your neck (2)  
• End/stop button to end and reject calls or to stop playing music on the  
music player (3)  
• Play button to play and pause music on the music player (4)  
• Fast backward button to move between music tracks or stored radio  
channels or to scan for new radio channels (5)  
• Fast forward button to move between music tracks or stored radio  
channels or to scan for new radio channels (6)  
• Pop-PortTM connector to connect the headset to the phone (7)  
6
 
H e a d s e t p a r t s  
• Display to show time, radio channels, music tracks, caller IDs or  
numbers, and icons (8)  
• Call button to redial, answer or swap between calls, or to display the  
time (9)  
• Volume up and volume down buttons to increase or decrease the  
volume (10)  
• Music button to activate and deactivate the FM radio or music player  
or to switch between the two (11)  
• Keylock switch to lock the headset buttons (12)  
• Clip to attach the headset for carrying (13)  
7
 
B a s i c a n d c a l l f u n c t i o n s  
3. Basic and call functions  
Lock keys  
Slide the keylock switch to lock and unlock the headset buttons.  
When locked, all button presses are ignored and  
display. Press the call or end/stop button to answer or reject incoming  
calls even if the buttons are locked.  
appears on the  
Adjust earpiece volume  
Press the volume up and volume down buttons to adjust the earpiece  
volume. If you press and hold either button, the volume continues to  
increase or decrease until you release the button.  
The current volume level appears on the display.  
Received messages  
When you receive SMS or MMS messages, the following icons appear  
near the call button:  
indicates you have at least one unread SMS message that you can  
view on the phone.  
indicates you have at least one unread MMS message that you can  
view on the phone.  
8
 
B a s i c a n d c a l l f u n c t i o n s  
Display time  
Briefly press the call button to display the current time for 5 seconds,  
unless you are listening to the radio or music or are in the middle of a call.  
Make calls  
When the headset is connected to your phone, make calls by using your  
phone normally.  
Redial  
Press the call button twice to redial the last number you called.  
Answer and end calls  
When you receive a call, the ringing tone selected on your phone sounds,  
and the caller ID and  
flash on the display. If the caller ID is unknown,  
the number of the caller, a note, or nothing flashes on the display. If you  
are listening to FM radio or music, the headset automatically stops the  
radio or music when you answer a call and starts it again when you end  
the call.  
To answer calls, press the call button.  
To end currently active calls, press the end/stop button.  
You can always answer and end calls with your phone.  
9
 
B a s i c a n d c a l l f u n c t i o n s  
Handle multiple calls  
If you receive a new call before you end a current call, the new caller ID  
flashes on the display. Press the call button once to put the current call on  
hold, and answer the new call. Press the call button again to swap  
between the two calls.  
Reject calls  
If you do not want to answer a call, press the end/stop button. You can  
also reject calls by using your phone.  
Voice dialing  
Depending on your phone model, you may be able to make a call with the  
headset by voice dialing. When no call is in progress, press and hold the  
call button until  
appears on the display. Say the voice tag. The phone  
dials the related phone number.  
10  
 
R a d i o a n d m u s i c f u n c t i o n s  
4. Radio and music functions  
Activate the radio or music player  
Press the music button to activate the FM radio or music player. If your  
phone has both an FM radio and a music player, the FM radio starts  
playing. Briefly press the music button to switch between the radio and  
music.  
Press and hold the music button to deactivate the FM radio or the music  
player.  
You can also activate and deactivate the FM radio and the music player by  
using your phone.  
Warning: When using the headset your ability to hear outside sounds  
may be affected. Do not use the headset where it can endanger your  
safety.  
Radio functions  
You must activate the FM radio with the music button or your phone  
before you can use it. If you have no radio channels preset in your phone,  
the currently used radio frequency and  
If there are radio channels preset in your phone, the name of the current  
channel and appear on the display.  
appear on the display.  
11  
 
R a d i o a n d m u s i c f u n c t i o n s  
To skip to the next or previous stored radio channel, press the fast forward  
or fast backward button. If there is only one channel preset in your phone,  
the same channel continues to play.  
To automatically search for new channels, press and hold the fast forward  
or fast backward button. The found channel appears on the display. You  
can store the channel using your phone.  
Music player functions  
You must activate the music player with the music button or your phone  
before you can use it. If you have no music tracks stored in your phone,  
appears on the display, and the music player is turned off.  
Warning: Listen to music at a moderate level. Continuous exposure to  
high volume may damage your hearing.  
If you have at least one music track stored in your phone, the current  
music track title and  
appear on the display.  
To pause or resume the music, press the play button.  
To stop the music, press the end/stop button. To restart it, press the play  
button.  
To skip to the next or previous music track, press the fast forward or fast  
backward button. If there is only one music track stored in your phone,  
you skip to the beginning of the same track.  
To move forward or backward within the current music track, press and  
hold the fast forward or fast backward button.  
12  
 
C a r e a n d m a i n t e n a n c e  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be  
treated with care. The suggestions below will help you protect your warranty  
coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture  
can contain minerals that will corrode electronic circuits. If your device does  
get wet, allow it to dry completely.  
Do not use or store the device in dusty, dirty areas. Its moving parts and  
electronic components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the  
device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
If your device is not working properly, take it to the nearest authorized service  
facility for service.  
13  
 

MURO Power Screwdriver VL71 FLR User Manual
NETGEAR Network Router DGFV338 User Manual
NextBase DVD Player SDV77 BD User Manual
Nortel Networks Switch 8300 User Manual
Nuvo Speaker System E6G User Manual
One for All Universal Remote URC 6131 User Manual
Palsonic Microwave Oven PMO 850 User Manual
Panasonic Fax Machine KX FLB751AL User Manual
Panasonic Network Card AJ HDP2000P User Manual
Panasonic Webcam KX HNC200 User Manual